Reference Guide

Dynamic Host Configuration Protocol (DHCP) | 359
Parameters
Command Mode
DHCP <POOL>
Default
None
Command History
disable
s z
Disable DHCP Server.
DHCP Server is disabled by default. Enable the system to be a DHCP server using the no form of the
disable command.
Syntax
disable
Command Mode
DHCP <POOL>
Default
Disabled
Command History
dns-server
s z
Assign a DNS server to clients based on address pool.
Syntax
dns-server address [address2...address8]
Parameters
Command Mode
DHCP <POOL>
Default
None
Command History
address
Enter the a list of routers that may be the default gateway for clients on the subnet. You may
specify up to 8. List them in order of preference.
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the S-Series
S6000
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the S-Series
S6000
address
Enter the a list of DNS servers that may service clients on the subnet. You may list up to 8
servers, in order of preference.
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the S-Series