Reference Guide

348 | Debugging and Diagnostics
www.dell.com | support.dell.com
Defaults
No default behavior or values
Command Modes
EXEC Privilege
Command History
Related
Commands
Usage Information
The unit numbers given are internal port numbers. For a cross reference of the internal and user port
numbers, see the Z9000 Debugging and Diagnostics chapter in the FTOS Configuration Guide for the
Z9000 System.
clear hardware system-flow
s z
Clear system-flow statistics from selected hardware components.
Syntax
clear hardware system-flow layer2 stack-unit id port-set 0-0 counters
Parameters
Defaults
No default behavior or values
Command Modes
EXEC Privilege
Command History
Related
Commands
cpu sata-interface
statistics
Enter the keywords cpu sata-interface statistics to clear the sata
interface error counting statistics.
stack-port S-Series only: Enter the keyword stack-port followed by the port number
of the stacking port to clear the statistics of the particular stacking port.
Range depends on platform.
Version 9.0.2.0 Introduced on S6000
Version 8.3.11.1 Introduced on Z9000
Version 8.3.11.5 Modified: added i2c and sata-interface statistics.
show hardware system-flow Display the data plane or management plane input and output statistics of the
designated component of the designated stack member.
S6000
stack-unit id Enter the keyword stack-unit to select a particular stack member and
then enter one of the following command options to clear a specific
collection of data.
Unit ID range:
Z9000: 0-7
port-set 0–0 counters Enter the keyword port-set along with a port-pipe number, from 0 to 0,
followed by the keyword counters to clear the system-flow counters on the
selected port-pipe.
Note: S25 models (S25N, S25P, S25V, etc.) have only port-pipe 0.
Version 9.0.2.0 Introduced on S6000
Version 8.3.11.1 Introduced on Z9000
Version 8.3.11.5 Introduced on S-Series
show hardware system-flow Display the data plane or management plane input and output statistics of the
designated component of the designated stack member.