Reference Guide

346 | Debugging and Diagnostics
www.dell.com | support.dell.com
offline stack-unit
s z
Place a stack unit in the offline state.
Syntax
offline stack-unit number
Parameters
Defaults
None
Command Mode
EXEC Privilege
Command History
H
Related
Commands
H
Usage Information
You cannot enter this command on a Master or Standby unit.
The system reboots when the off-line diagnostics complete. This is an automatic process. A warning
message appears when the offline stack-unit command is implemented.
Warning - Diagnostic execution will cause stack-unit to reboot after
completion of diags.
Proceed with Offline-Diags [confirm yes/no]:y
online stack- unit
z
Place a stack unit in the online state.
Syntax
online stack-unit number
Parameters
Defaults
None
Command Mode
EXEC Privilege
S6000
number
Enter the stack unit number.
Unit ID range:
S4810 range: 0-11
Z9000: 0-7
S6000: 0-5
Version 9.0.2.0 Introduced on S6000
Version 8.3.11.1 Introduced on Z9000
Version 8.3.11.5 Added warning message to off-line diagnostics
show environment (S-Series) View S-Series system component status (for example, temperature, voltage).
S6000
number
Enter the stack unit number.
Unit ID range:
S4810 range: 0-11
Z9000: 0-7
S6000: 0-5