Reference Guide

318 | Data Center Bridging (DCB)
www.dell.com | support.dell.com
DCBX Commands
• advertise dcbx-appln-tlv
• advertise dcbx-tlv
• dcbx version
• dcbx port-role
• fcoe priority-bits
• iscsi priority-bits
• debug dcbx
• show interface dcbx detail
advertise dcbx-appln-tlv
On a DCBX port with a manual role, configure the application priority TLVs advertised on the
interface to DCBX peers.
Syntax
advertise dcbx-appln-tlv {fcoe | iscsi}
To remove the application priority TLVs, use the no advertise dcbx-appln-tlv {fcoe | iscsi}
command.
Parameters
Defaults
Application priority TLVS are enabled to advertise FCoE and iSCSI.
Command Modes
PROTOCOL LLDP
Command History
Usage Information
To disable TLV transmission, use the no form of the command; for example, no advertise
dcbx-appln-tlv iscsi.
advertise dcbx-tlv
On a DCBX port with a manual role, configure the PFC and ETS TLVs advertised to DCBX peers.
Syntax
advertise dcbx-tlv {ets-conf | ets-reco | pfc} [ets-conf | ets-reco | pfc] [ets-conf | ets-reco | pfc]
To remove the advertised ETS TLVs, use the no advertise dcbx-tlv command.
Parameters
S6000
{fcoe | iscsi}
Enter the application priority TLVs, where:
•
fcoe: enables the advertisement of FCoE in application priority TLVs.
•
iscsi: enables the advertisement of iSCSI in application priority TLVs.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module
S6000
{ets-conf | ets-reco |
pfc}
Enter the PFC and ETS TLVs to be advertised, where:
•
ets-conf: enables the advertisement of ETS configuration TLVs.
•
ets-reco: enables the advertisement of ETS recommend TLVs.
•
pfc: enables the advertisement of PFC TLVs.