Reference Guide

File Management | 31
Command
History
Example (S6000)
FTOS# show boot system stack-unit 0
Current system image information in the system:
=============================================
Type Boot Type A B
----------------------------------------------------------------
Stack-unit 0 FLASH BOOT 9-0(2-1) 9-0(2-0)[boot]
FTOS#
show bootvar
z
Display the variable settings for the system boot parameters.
Syntax
show bootvar
Command Modes
EXEC Privilege
Command
History
Example (show
bootvar)
FTOS#show bootvar
PRIMARY IMAGE FILE = system://B
SECONDARY IMAGE FILE = tftp://10.16.127.35/FTOS-SI-9-0-2-0.bin
DEFAULT IMAGE FILE = system://A
LOCAL CONFIG FILE = variable does not exist
PRIMARY HOST CONFIG FILE = variable does not exist
SECONDARY HOST CONFIG FILE = variable does not exist
PRIMARY NETWORK CONFIG FILE = variable does not exist
SECONDARY NETWORK CONFIG FILE = variable does not exist
CURRENT IMAGE FILE = system://B
CURRENT CONFIG FILE 1 = flash://startup-config
CURRENT CONFIG FILE 2 = variable does not exist
CONFIG LOAD PREFERENCE = local first
BOOT INTERFACE GATEWAY IP ADDRESS = 10.16.132.254
Reload Mode = normal-reload
FTOS#
Related
Commands
show file
s z
Display contents of a text file in the local filesystem.
Syntax
show file filesystem
Version 9.0.2.0 Introduced on the S6000
Version 8.3.11.1 Introduced on the Z9000
Version 8.3.12.0 Introduced on S4810.
S6000
Version 9.0.2.0 Introduced on the S6000
version 8.3.11.4 Output expanded to display current reload mode (normal or Jumpstart).
Version 8.3.11.1 Introduced on the Z9000
cd Set the location of configuration files on local devices.
cd Set the location of configuration files from a remote network.
S6000