Reference Guide

308 | Content Addressable Memory (CAM)
www.dell.com | support.dell.com
show cam-acl
z
Display the details of the CAM profiles on the chassis and all stack-units.
Syntax
show cam-acl
Defaults
None
Command Modes
EXEC Privilege
Command
History
Usage
Information
The display reflects the settings implemented with the cam-acl command.
Example
Figure 11-1. Command Output: show cam-acl (default)
FTOS#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 5
Ipv4Acl : 6
Ipv6Acl : 0
Ipv4Qos : 1
L2Qos : 1
-- Line card 4 --
Current Settings(in block sizes)
L2Acl : 5
Ipv4Acl : 6
Ipv6Acl : 0
Ipv4Qos : 1
L2Qos : 1
FTOS#
Figure 11-2. Command Output: show cam-acl (non-default)
FTOS#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
-- Line card 4 --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
S6000
Version 9.0.2.0 Introduced on the S6000.
version 9.0.0.0 Introduced on the Z9000.
Version 8.3.10.1 Introduced on the S4810.