Reference Guide

30 | File Management
www.dell.com | support.dell.com
Caution: If you elect to format the flash, all files, including the startup configuration file will be lost. If
you do decide to format the specified flash, consider saving the running config as the startup config
(use the write memory command or copy run start)
Related
Commands
rename
s
Rename a file in the local file system.
Syntax
rename url url
Parameters
Command Modes
EXEC Privilege
Command
History
show boot system
s z
Displays information about boot images currently configured on the system.
Syntax
show boot systemstack-unit {0-11|0-7|0-5| all}
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
copy
Copy the current configuration to either the startup-configuration file or the
terminal.
show file
Display contents of a text file in the local file system.
show file-systems
Display information about the file systems on the system.
S6000
url
Enter the following keywords and a filename:
• For a file on the internal Flash, enter
flash:// followed by the filename.
• For a file on the external Flash, enter
usbflash:// followed by the filename.
Version 9.0.2.0 Introduced on the S6000
Version 7.6.1.0 Introduced on S-Series
S6000
all
Enter this keyword to display boot image information for all linecards and
rpms.
stack-unit
Enter this keyword to display boot image information for one or all of the
units.
S4810 Range: 0 - 11
Z9000 Range: 0 - 7
S6000 Range: 0-5