Manualshelf

Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000
291292293294295296297298299300
Border Gateway Protocol | 299
IPv6 MBGP Commands
Multiprotocol BGP (MBGP) is an enhanced BGP that enables multicast routing policy throughout the
Internet and connecting multicast topologies between BGP and autonomous systems (AS). FTOS
MBGP is implemented as per IETF RFC 1858. The MBGP commands are:
• show ipv6 mbgproutes
show ipv6 mbgproutes
s z
Display the selected IPv6 MBGP route or a summary of all MBGP routes in the table.
Syntax
show ipv6 mbgproutes ipv6-address prefix-length | summary
Parameters
Command Modes
EXEC
Command
History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.10.0 Introduced on the S4810
S6000
ipv6-address
prefix-length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the
/x format.
Range: /0 to /128.
The:: notation specifies successive hexadecimal fields of zeros.
summary Display a summary of RPF routes.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.10.0 Introduced on the S4810