Reference Guide
284 | Border Gateway Protocol
www.dell.com | support.dell.com
Path source: I - internal, a - aggregate, c - confed-external, r -
redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*>I 3.0.0.0/8 1.1.1.2 0 100 0 2914 1239 80 i
*>I 4.0.0.0/8 1.1.1.2 0 100 0 2914 3356 i
*>I 4.17.225.0/24 1.1.1.2 0 100 0 2914 11853
11853 11853 11853 11853 6496
*>I 4.17.226.0/23 1.1.1.2 0 100 0 2914 11853
11853 11853 11853 11853 6496
*>I 4.17.251.0/24 1.1.1.2 0 100 0 2914 11853
11853 11853 11853 11853 6496
*>I 4.17.252.0/23 1.1.1.2 0 100 0 2914 11853
11853 11853 11853 11853 6496
*>I 4.19.2.0/23 1.1.1.2 0 100 0 2914 701
6167 6167 6167 i
*>I 4.19.16.0/23 1.1.1.2 0 100 0 2914 701
6167 6167 6167 i
*>I 4.21.80.0/22 1.1.1.2 0 100 0 2914 174
4200 16559 i
*>I 4.21.82.0/24 1.1.1.2 0 100 0 2914 174
4200 16559 i
*>I 4.21.252.0/23 1.1.1.2 0 100 0 2914 701
6389 8063 19198 i
*>I 4.23.180.0/24 1.1.1.2 0 100 0 2914 3561
6128 30576 i
*>I 4.36.200.0/21 1.1.1.2 0 100 0 2914 14742
11854 14135 i
*>I 4.67.64.0/22 1.1.1.2 0 100 0 2914 11608
19281 i
*>I 4.78.32.0/21 1.1.1.2 0 100 0 2914 3491
29748 i
*>I 6.1.0.0/16 1.1.1.2 0 100 0 2914 701 668 i
*>I 6.2.0.0/22 1.1.1.2 0 100 0 2914 701 668 i
*>I 6.3.0.0/18 1.1.1.2 0 100 0 2914 701 668 i
Command
History
show ip bgp summary
s z
Enables you to view the status of all BGP connections.
Syntax
show ip bgp [ipv4 unicast] summary
Command Modes
EXEC
EXEC Privilege
Table 9-15. Command Example fields: show ip bgp regexp
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router.
If 0.0.0.0 is listed in this column, then non-BGP routes exist in the router’s routing table.
Metric Displays the BGP router’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight
Path Lists all the AS paths the route passed through to reach the destination network.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
S6000