Reference Guide

Border Gateway Protocol | 281
0x1c6e2064 83 2 209:777 209:40832
0x1f588ecc 85 570 209:209 209:40832
0x1f57cc0c 98 2 209:209 209:21226 286:3031 13646:1044 13646:1124
13646:1154 13646:1164 13646:1184 13646:1194 13646:1204 13646:1214 13646:1224
13646:1234 13646:1244 13646:1254 13646:1264 13646:3000
0x1d65b2ac 117 6 209:209 209:999 209:31272
0x1f5854ac 119 18 209:209 209:21226 286:108 286:111 286:777 286:3033
517:5104
0x1d77b49c 119 2 209:209 209:21226 286:81 286:777 286:3358 790:51
790:61 790:3358
0x1c6e210c 120 2 209:777 209:31272
0x1f588bf4 122 680 209:209 209:31272
0x1f004f64 123 12 209:209 209:21226 286:777 286:3031 5466:20
--More--
Command
History
show ip bgp peer-group
s z
Enables you to view information on the BGP peers in a peer group.
Syntax
show ip bgp [ipv4 unicast] peer-group [peer-group-name [detail | summary]]
Parameters
Command Modes
EXEC
EXEC Privilege
Example
Figure 9-24. Command Example: show ip bgp peer-group on the S4810 (Partial)
FTOS#show ip bgp peer-group
Peer-group pg1
BGP version 4
Table 9-13. Command Example fields: show ip bgp paths community
Field Description
Address Displays the internal address where the path attribute is stored.
Hash Displays the hash bucket where the path attribute is stored.
Refcount Displays the number of BGP routes using these communities.
Community Displays the community attributes in this BGP path.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
S6000
ipv4 unicast
(OPTIONAL) Enter the
ipv4 unicast keywords to view information only
related to ipv4 unicast routes.
peer-group-name
(OPTIONAL) Enter the name of a peer group to view information about that peer
group only.
detail (OPTIONAL) Enter the keyword detail to view detailed status information of the
peers in that peer group.
summary (OPTIONAL) Enter the keyword summary to view status information of the
peers in that peer group.
The output is the same as that found in show ip bgp summary command