Reference Guide

28 | File Management
www.dell.com | support.dell.com
Command
History
dir
s
Display the files in a file system. The default is the current directory.
Syntax
dir [filename | directory name:]
Parameters
Command Modes
EXEC Privilege
Command
History
Example
FTOS#dir
Directory of flash:
1 -rwx 6478482 May 13 101 16:54:34 E1200.BIN
flash: 64077824 bytes total (57454592 bytes free)
FTOS#
Related
Commands
format flash (S-Series)
s
Erase all existing files and reformat the filesystem in the internal flash memory. Once the filesystem is
formatted, files cannot be restored.
Syntax
format flash:
Default
flash memory
Command Modes
EXEC Privilege
Command
History
Usage
Information
You must include the colon (:) when entering this command.
Caution: This command deletes all files, including the startup configuration file. After executing this
command, consider saving the running config as the startup config (use the write memory command or
copy run start).
Version 9.0.2.0 Introduced on the S6000
Version 7.6.1.0 Introduced on S-Series
S6000
filename | directory name:
(OPTIONAL) Enter one of the following:
• For a file or directory on the internal Flash, enter
flash:// followed
by the filename or directory name.
• For a file or directory on the external Flash, enter usbflash
://
followed by the filename or directory name:
Version 9.0.2.0 Introduced on the S6000
Version 7.6.1.0 Introduced on S-Series
cd
Change working directory.
S6000
Version 9.0.2.0 Introduced on the S6000
Version 7.6.1.0 Introduced on S-Series