Reference Guide

278 | Border Gateway Protocol
www.dell.com | support.dell.com
63.114.8.33 63.114.8.33, Gi 12/22 240984 0 0 00:18:25
63.114.8.34 63.114.8.34, Gi 12/22 135152 0 0 00:18:13
63.114.8.35 63.114.8.35, Gi 12/22 1 0 0 00:18:07
63.114.8.60 63.114.8.60, Gi 12/22 135155 0 0 00:18:11
FTOS>
Command
History
show ip bgp paths
s z
View all the BGP path attributes in the BGP database.
Syntax
show ip bgp paths [regexp regular-expression]
Parameters
Command Modes
EXEC
EXEC Privilege
Example
Figure 9-21. Command Example: show ip bgp paths (Partial)
FTOS#show ip bgp path
Table 9-10. Command Example fields: show ip bgp next-hop
Field Description
Next-hop Displays the next-hop IP address.
Via Displays the IP address and interface used to reach the next hop.
RefCount Displays the number of BGP routes using this next hop.
Cost Displays the cost associated with using this next hop.
Flaps Displays the number of times the next hop has flapped.
Time Elapsed Displays the time elapsed since the next hop was learned. If the route is down,
then this field displays time elapsed since the route went down.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
S6000
regexp
regular-expression
Enter a regular expression then use one or a combination of the following
characters to match:
• . = (period) any single character (including a white space)
•
* = (asterisk) the sequences in a pattern (0 or more sequences)
• + = (plus) the sequences in a pattern (1 or more sequences)
• ? = (question mark) sequences in a pattern (either 0 or 1 sequences). You
must enter an escape sequence (CTRL+v) prior to entering the ? regular
expression.
• [ ] = (brackets) a range of single-character patterns.
• ( ) = (parenthesis) groups a series of pattern elements to a single element
• { } = (braces) minimum and the maximum match count
• ^ = (caret) the beginning of the input string. If the caret is used at the
beginning of a sequence or range, it matches on everything BUT the
characters specified.
• $ = (dollar sign) the end of the output string.