Reference Guide

270 | Border Gateway Protocol
www.dell.com | support.dell.com
Syntax
show ip bgp [ipv4 unicast] filter-list as-path-name
Parameters
Command Modes
EXEC
EXEC Privilege
Example
Figure 9-12. Command Example: show ip bgp filter-list
FTOS#show ip bgp filter-list hello
BGP table version is 80227, local router ID is 120.1.1.1
Status codes: s suppressed, d damped, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r -
redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* I 6.1.5.0/24 192.100.11.2 20000 9999 0 ?
* I 192.100.8.2 20000 9999 0 ?
* I 192.100.9.2 20000 9999 0 ?
* I 192.100.10.2 20000 9999 0 ?
*>I 6.1.5.1 20000 9999 0 ?
* I 6.1.6.1 20000 9999 0 ?
* I 6.1.20.1 20000 9999 0 ?
* I 6.1.6.0/24 192.100.11.2 20000 9999 0 ?
* I 192.100.8.2 20000 9999 0 ?
* I 192.100.9.2 20000 9999 0 ?
* I 192.100.10.2 20000 9999 0 ?
*>I 6.1.5.1 20000 9999 0 ?
* I 6.1.6.1 20000 9999 0 ?
* I 6.1.20.1 20000 9999 0 ?
* I 6.1.20.0/24 192.100.11.2 20000 9999 0 ?
* I 192.100.8.2 20000 9999 0 ?
* I 192.100.9.2 20000 9999 0 ?
* I 192.100.10.2 20000 9999 0 ?
FTOS#
Table 9-6 defines the information displayed in Figure 9-12.
ipv4 unicast
(OPTIONAL) Enter the
ipv4 unicast keywords to view information only related
to ipv4 unicast routes.
as-path-name
Enter the name of an AS-PATH.
Table 9-6. Command Example fields: show ip bgp filter-list
Field Description
Path source codes Lists the path sources shown to the right of the last AS number in the
Path column:
• i = internal route entry
• a = aggregate route entry
• c = external confederation route entry
• n = network route entry
• r = redistributed route entry
Next Hop Displays the next hop address of the BGP router.
If 0.0.0.0 is listed in this column, then local routes exist in the routing
table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.