Reference Guide

264 | Border Gateway Protocol
www.dell.com | support.dell.com
*>I 192.68.16.1 0 100 0 i
* I 192.68.16.1 0 100 0 i
* I 192.68.16.1 0 100 0 i
* I 192.68.16.1 0 100 0 i
* I 10.19.75.5/32 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
*>I 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
* I 10.30.1.0/24 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
*>I 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
Table 9-2 defines the information displayed in Figure 9-7.
Command
History
show ip bgp community
s z
View information on all routes with Community attributes or view specific BGP community groups.
Syntax
show ip bgp [ipv4 unicast] community [community-number] [local-as] [no-export]
[no-advertise]
Parameters
Table 9-2. show ip bgp cluster-list Command Fields
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router.
If 0.0.0.0 is listed in this column, then local routes exist in the routing
table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight
Path Lists all the ASs the route passed through to reach the destination network.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
S6000
ipv4 unicast
(OPTIONAL) Enter the
ipv4 unicast keywords to view information only
related to ipv4 unicast routes.
community-number
Enter the community number in AA:NN format where AA is the AS number (2
bytes) and NN is a value specific to that autonomous system.
You can specify up to eight community numbers to view information on those
community groups.