Reference Guide

26 | File Management
www.dell.com | support.dell.com
cd
s
Change to a different working directory.
Syntax
cd directory
Parameters
Command Modes
EXEC Privilege
Command
History
copy
s
Copy one file to another location. FTOS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP
(in the hostip field).
Syntax
copy source-file-url destination-file-url
Parameters
Command Modes
EXEC Privilege
Command
History
Usage
Information
FTOS supports a maximum of 100 files, at the root directory level, on both the internal and external
Flash.
Refer to the FTOS Release Notes for a list of approved USB vendors.
When copying a file to a remote location (for example, using Secure Copy (SCP)), enter only the
keywords and FTOS prompts you for the rest of the information.
S6000
directory
(OPTONAL) Enter one of the following:
•
flash: (internal Flash) or any sub-directory
•
usbflash: (internal Flash) or any sub-directory
Version 9.0.2.0 Introduced on the S6000
Version 7.6.1.0 Introduced on the S-Series
S6000
file-url
Enter the following location keywords and information:
• To copy a file from the internal FLASH, enter
flash:// followed by the filename.
• To copy a file on an FTP server, enter
ftp://user:password@hostip/filepath
• To copy the running configuration, enter the keyword running-config.
• To copy the startup configuration, enter the keyword
startup-config.
• To copy using Secure Copy (SCP), enter the keyword
scp: (If scp: is entered in the source
position, then enter the target URL;
If
scp: is entered in the target position, first enter the source URL; see below for examples.)
• To copy a file on a TFTP server, enter
tftp://hostip/filepath
• To copy a file from an external USB drive, enter usbflash://filepath
Version 9.0.2.0 Introduced on the S6000
Version 8.4.1.0 Added IPv6 addressing support for FTP, TFTP, and SCP.
Version 7.6.1.0 Introduced on S-Series and added SSH port number to SCP prompt sequence on all
systems.