Reference Guide

252 | Border Gateway Protocol
www.dell.com | support.dell.com
Command
History
neighbor route-reflector-client
s z
Configure a neighbor as a member of a route reflector cluster.
Syntax
neighbor {ip-address | peer-group-name} route-reflector-client
To indicate that the neighbor is not a route reflector client or to delete a route reflector configuration,
use the no neighbor {ip-address | peer-group-name} route-reflector-client command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER BGP
Usage
Information
The first time you enter this command it configures the neighbor as a route reflector and members of
the route-reflector cluster. Internal BGP (IBGP) speakers do not need to be fully meshed if you
configure a route reflector.
When all clients of a route reflector are disabled, the neighbor is no longer a route reflector.
Command
History
neighbor send-community
s z
Send a COMMUNITY attribute to a BGP neighbor or peer group. A COMMUNITY attribute indicates
that all routes with that attribute belong to the same community grouping.
Syntax
neighbor {ip-address | peer-group-name} send-community
To disable sending a COMMUNITY attribute, use the no neighbor {ip-address |
peer-group-name} send-community command.
Parameters
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
S6000
ip-address
Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group.
All routers in the peer group receive routes from a route reflector.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
S6000
ip-address
Enter the IP address of the peer router in dotted decimal format.
peer-group-name
Enter the name of the peer group to send a COMMUNITY attribute to all
routers within the peer group.
extended Optional. Enter the keyword extended to send extended community attribute.
standard Optional. Enter the keyword standard to send standard community attribute.