Reference Guide

Border Gateway Protocol | 239
Defaults
none
Command Modes
CONFIGURATION-ROUTER-BGP-ADDRESS FAMILY
Related
Commands
Command
History
neighbor advertisement-interval
s z
Set the advertisement interval between BGP neighbors or within a BGP peer group.
Syntax
neighbor {ip-address | peer-group-name} advertisement-interval seconds
To return to the default value, use the no neighbor {ip-address | peer-group-name}
advertisement-interval command.
Parameters
Defaults
seconds = 5 seconds (internal peers); seconds = 30 seconds (external peers)
Command Modes
ROUTER BGP
Command
History
neighbor advertisement-start
s z
Set the minimum interval before starting to send BGP routing updates.
send
Enter this keyword to indicate that the system will send multiple paths to peers.
receive
Enter this keyword to indicate that the system will accept multiple paths from
peers.
both
Enter this keyword to indicate that the system will send and accept multiple
paths from peers.
path-
count
Enter the number paths supported.
Range: 2-64
bgp add-path Allow the advertisement of multiple paths for the same address prefix without the
new paths implicitly replacing any previous ones.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
S6000
ip-address
Enter the IP address of the neighbor in dotted decimal format.
peer-group-name
Enter the name of the peer group to set the advertisement interval for all routers
in the peer group.
seconds
Enter a number as the time interval, in seconds, between BGP advertisements.
Range: 0 to 600 seconds.
Default: 5 seconds for internal BGP peers; 30 seconds for external BGP peers.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
S6000