Reference Guide

234 | Border Gateway Protocol
www.dell.com | support.dell.com
Command Modes
EXEC Privilege
Usage
Information
Enter no debug ip bgp command to remove all configured debug commands for BGP.
Command
History
debug ip bgp notifications
s z
Enables you to view information about BGP notifications received from neighbors.
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] notifications [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name]
notifications [in | out] command.
Parameters
Command Modes
EXEC Privilege
Usage
Information
Enter no debug ip bgp command to remove all configured debug commands for BGP.
Command
History
debug ip bgp soft-reconfiguration
s z
Enable soft-reconfiguration debug.
Syntax
debug ip bgp {ip-address | peer-group-name} soft-reconfiguration
To disable, use the no debug ip bgp {ip-address | peer-group-name} soft-reconfiguration
command.
Parameters
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
S6000
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.
peer-group
peer-group-name
(OPTIONAL) Enter the keyword peer-group followed by the name of the
peer group.
in (OPTIONAL) Enter the keyword in to view BGP notifications received from
neighbors.
out (OPTIONAL) Enter the keyword out to view BGP notifications sent to
neighbors.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
S6000
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.
peer-group-name
(OPTIONAL) Enter the name of the peer group to disable or enable all routers
within the peer group.