Reference Guide

204 | Boot Command Line Interface (BCLI)
www.dell.com | support.dell.com
Erasing NVRAM sectors....Erasing NvRam of size 1024 KB ... DONE
watchdog <string>
Enable the watchdog timer, when the enabled watchdog timer is set to 60 seconds.
Syntax
<string> enable/disable/status/timeout/settimeout watchdog timer
Parameters
Note: By default, watchdog is disabled.
Command Modes
BOOT_ADMIN
Command
History
Example
Boot_user#BOOT_ADMIN # watchdog status
WATCHDOG DISABLED
BOOT_ADMIN # watchdog enable
WATCHDOG ENABLED
BOOT_ADMIN # watchdog status
WATCHDOG ENABLED
BOOT_ADMIN # watchdog timeout
WATCHDOG TIMEOUT: 60
S6000
enable
Enter the keyword enable to enable the watchdog.
disable
Enter the keyword disable to disable the watchdog.
status
Enter the keyword status to see the watchdog status.
timeout
Enter the keyword timeout to see the timeout configured for the watchdog.
settimeout
Enter the keyword set timeout to set timeout.
Version 9.0.2.0 Introduced on the S6000.