Reference Guide

Boot Command Line Interface (BCLI) | 203
Example Serial
console
BOOT_USER # serial console 0 9600
BOOT_USER # BOOT_USER #
show serial console baud rate
Use the show serial console to show the values of the serial console baud rate.
Syntax
show serial console baudrate
Command Modes
BOOT_USER
Command
History
Example
BOOT_USER # show serial console baudrate
Serial console baudrate = 9600
etheraddr <macaddr>
Assign the management port MAC address.
Syntax
etheraddr <macaddr>
Parameters
Command Modes
BOOT_ADMIN
Command
History
Usage
Information
Use this command to assign a MAC address if FTOS cannot find a default MAC address.
Example
BOOT_ADMIN # etheraddr aa:aa:aa:aa:aa:aa
<Macaddr> XX:xx:xx:xx:xx:xx
No defaults for this
NVRAM erase
Erase all NVRAM contents alone.
Syntax
nvram erase
Command Modes
BOOT_ADMIN
Command
History
Example
BOOT_USER # BOOT_ADMIN # nvram erase
Are you sure (y/n)? : yes
S6000
Version 9.0.2.0 Introduced on the S6000.
S6000
mac-address
Enter a MAC address in standard format.
Version 9.0.2.0 Introduced on the S6000.
S6000
Version 9.0.2.0 Introduced on the S6000.