Reference Guide

202 | Boot Command Line Interface (BCLI)
www.dell.com | support.dell.com
Related
Commands
show interface management ethernet
Display the IP address configured for the Management interface.
Syntax
show interface management ethernet
Command Modes
BOOT_USER
Command
History
Example
BOOT_USER # show interfaces management ethernet
Management ethernet IP address: 10.16.133.17/24
BOOT_USER #
On the S6000, the output of this command includes the MAC address and port number of the assigned
management port.
Example
BOOT_ADMIN # show int man eth
Management ethernet IP address: 10.16.132.4/16
BOOT_ADMIN #
Related
Commands
serial console
Use the serial console to set the serial console baud rate.
Syntax
serial console <int> <int>
Parameters
Command Modes
BOOT_USER
Command
History
default-gateway
Configure the IP address for the default gateway.
interface management ethernet ip address
Assign an IP address to the Management Ethernet
interface.
S6000
Version 9.0.2.0 Introduced on the S6000.
interface management ethernet ip address
Assign an IP address to the Management Ethernet
interface.
reload Configure speed, duplex, and negotiation settings for the
management interface.
S6000
serial console
[unit] [baud]
Enter the keyword to set the serial port baud rate. The supported values for serial
console:
• Unit - 0
• Baud rate -9600,115200
No defaults.
Version 9.0.2.0 Introduced on the S6000.