Reference Guide

Boot Command Line Interface (BCLI) | 201
Command
History
show bootvar
Display boot configuration information.
Syntax
show bootvar
Command Modes
BOOT_USER
Command
History
Example
BOOT_USER # show bootvar
PRIMARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
No Operating System boot parameters specified!
SECONDARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : flash
file name : systema (FTOS system://A Partition)
DEFAULT OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : tftp
file name : PS-SI-9-0-0-566.bin
Management Etherenet IP address : 10.16.133.17
Mask : 255.255.0.0
Server IP address : 10.16.1.200
Default Gateway IP address : 10.16.1.254
BOOT_USER #
Related
Commands
show default-gateway
Display the IP address configured for the default gateway.
Syntax
show default-gateway
Command Mode
BOOT_USER
Command
History
Example
BOOT_USER # show default-gateway
Gateway IP address: 10.16.100.254
BOOT_USER #
Version 9.0.2.0 Introduced on the S6000.
S6000
Version 9.0.2.0 Introduced on the S6000.
boot change
Change the primary, secondary, or default boot image configuration.
boot zero Erase the configured primary, secondary, or default boot image parameters.
S6000
Version 9.0.2.0 Introduced on the S6000.