Reference Guide

198 | Boot Command Line Interface (BCLI)
www.dell.com | support.dell.com
Usage
Information
This command reverses changes made with the boot change command.
BOOT_USER # boot zero primary
BOOT_USER # boot zero secondary
BOOT_USER # boot zero default
BOOT_USER # show bootvar
PRIMARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
No Operating System boot parameters specified!
SECONDARY OPERATING SYSTEM BOOT PARAMETERS:
==========================================
No Operating System boot parameters specified!
DEFAULT OPERATING SYSTEM BOOT PARAMETERS:
========================================
No Operating System boot parameters specified!
BOOT_USER #
Related
Commands
boot show net config retries
Show the number of retries for network boot configuration failure.
Syntax
boot show net config retries
Command Modes
BOOT_USER
Command
History
u
Example
BOOT_USER# boot show net config retries
Number of Network Boot Config Retries is : 0
BOOT_USER #
boot write net config retries
Set the number of retries for network boot configuration failure.
Syntax
boot write net config retries <int>
Command Modes
BOOT_USER
Command
History
u
Example
BOOT_USER # boot write net config retries 2
Updated number of Network Boot Config retries to 2.
boot change
Change the primary, secondary, or default boot image configuration.
S6000
Version 9.0.2.0 Introduced on the S6000.
S6000
Version 9.0.2.0 Introduced on the S6000.