Reference Guide

Access Control Lists (ACL) | 185
\
Example
Figure 6-21. Command Example: route-map
FTOS(conf)#route-map dempsey
FTOS(config-route-map)#
Usage
Information
Use caution when you delete route maps because if you do not specify a sequence number, all route
maps with the same map-name are deleted when you use no route-map map-name command.
Prior to 7.8.1.0, names are up to 16 characters long.
Related
Commands
set as-path
s z
Configure a filter to modify the AS path for BGP routes.
Syntax
set as-path prepend as-number [... as-number]
To remove an AS-Path setting, use the no set as-path {prepend as-number | tag} command.
Parameters
Defaults
Not configured
Command Modes
ROUTE-MAP
Command
History
Usage
Information
You can prepend up to eight AS numbers to a BGP route.
This command influences best path selection in BGP by inserting a tag or AS number into the
AS_PATH attribute.
Related
Commands
set automatic-tag
s z
Configure a filter to automatically compute the tag value of the route.
Syntax
set automatic-tag
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
Version 7.6.1.0 Support added for S-Series
show config Display the current configuration.
S6000
prepend as-number Enter the keyword prepend followed by up to eight AS numbers to be
inserted into the BGP path information.
Range: 1 to 65535
Version 9.0.2.0 Introduced on the S6000
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Support added for S-Series
match as-path Redistribute routes that match an AS-PATH attribute.
S6000