Reference Guide

178 | Access Control Lists (ACL)
www.dell.com | support.dell.com
description
s z
Add a description to this route map.
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
Defaults
No default behavior or values
Command Modes
ROUTE-MAP
Command
History
Related
Commands
match as-path
s z
Configure a filter to match routes that have a certain AS number in their BGP path.
Syntax
match as-path as-path-name
To delete a match AS path filter, use the no match as-path as-path-name command.
Parameters
Defaults
Not configured.
Command Modes
ROUTE-MAP
Command
History
Related
Commands
S6000
description
Enter a description to identify the route map (80 characters maximum).
Version 9.0.2.0 Introduced on the S6000
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Support added for S-Series
route-map Enable a route map
S6000
as-path-name
Enter the name of an established AS-PATH ACL, up to 140 characters.
Version 9.0.2.0 Introduced on the S6000
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
Version 7.6.1.0 Support added for S-Series
set as-path Add information to the BGP AS_PATH attribute.