Reference Guide

Access Control Lists (ACL) | 173
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
FTOS#show cam-acl
show cam-acl-egress
s
Show information on FP groups allocated for egress ACLs.
Syntax
show cam-acl-egress
Command Modes
EXEC
EXEC Privilege
Command
History
Related
Commands
Examples
Figure 6-17. Command Example: show cam-acl-egress (default profile)
FTOS#show cam-acl-egress
-- Chassis Egress Cam ACL --
Current Settings(in block sizes)
L2Acl : 1
Ipv4Acl : 1
Ipv6Acl : 2
-- Stack unit 0 --
Current Settings(in block sizes)
L2Acl : 1
Ipv4Acl : 1
Ipv6Acl : 2
FTOS#show cam-acl
show config
s
View the current IPv6 ACL configuration.
Syntax
show config
Command Modes
ACCESS-LIST
Command
History
Example
Figure 6-18. Command Example: show config
FTOS(conf-ipv6-acl)#show config
S6000
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.7.0
Introduced on the S4810.
cam-acl Configure CAM profiles to support IPv6 ACLs
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.7.0
Introduced on the S4810.