Reference Guide

172 | Access Control Lists (ACL)
www.dell.com | support.dell.com
Command
History
Related
Commands
show cam-acl
s
Show space allocated for IPv6 ACLs.
Syntax
show cam-acl
Command Modes
EXEC
EXEC Privilege
Command
History
Related
Commands
Examples
Figure 6-15. Command Example: show cam-acl (default profile)
FTOS#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 5
Ipv4Acl : 6
Ipv6Acl : 0
Ipv4Qos : 1
L2Qos : 1
-- Line card 4 --
Current Settings(in block sizes)
L2Acl : 5
Ipv4Acl : 6
Ipv6Acl : 0
Ipv4Qos : 1
L2Qos : 1
FTOS#show cam-acl
Figure 6-16. Command Example: show cam-acl (manually set profiles)
FTOS#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
-- Line card 4 --
Current Settings(in block sizes)
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.7.0
Introduced on the S4810.
deny Configure a filter to drop packets.
permit Configure a filter to forward packets.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.7.0
Introduced on the S4810.
cam-acl Configure CAM profiles to support IPv6 ACLs