Reference Guide

Access Control Lists (ACL) | 155
Example
Figure 6-11. Command Example: show ip prefix-list summary
FTOS#show ip prefix summary
Prefix-list with the last deletion/insertion: test
ip prefix-list test:
count: 3, range entries: 1, sequences: 5 - 15
ip prefix-list test1:
count: 2, range entries: 2, sequences: 5 - 10
ip prefix-list test2:
count: 1, range entries: 1, sequences: 5 - 5
ip prefix-list test3:
count: 1, range entries: 1, sequences: 5 - 5
ip prefix-list test4:
count: 1, range entries: 1, sequences: 5 - 5
ip prefix-list test5:
count: 1, range entries: 1, sequences: 5 - 5
ip prefix-list test6:
count: 1, range entries: 1, sequences: 5 - 5
FTOS#
IPv6 ACL Commands
The following commands configure IPv6 ACLs:
• cam-acl
• cam-acl-egress
• clear counters ipv6 access-group
• deny
• deny icmp
• deny tcp
• deny udp
• ipv6 access-group
• ipv6 control-plane egress-filter
• ipv6 access-list
• permit
• permit icmp
• permit tcp
• permit udp
• remark
• resequence access-list
• resequence prefix-list ipv6
• seq
• show cam-acl
• show cam-acl-egress
• show config
• show ipv6 accounting access-list
• show running-config acl
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
Version 7.6.1.0 Support added for S-Series