Reference Guide

154 | Access Control Lists (ACL)
www.dell.com | support.dell.com
FTOS(conf-nprefixl)#
show ip prefix-list detail
s z
Display details of the configured prefix lists.
Syntax
show ip prefix-list detail [prefix-name]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 6-10. Command Example: show ip prefix-list detail
FTOS#show ip prefix-list detail
Prefix-list with the last deletion/insertion: filter_ospf
ip prefix-list filter_in:
count: 3, range entries: 3, sequences: 5 - 10
seq 5 deny 1.102.0.0/16 le 32 (hit count: 0)
seq 6 deny 2.1.0.0/16 ge 23 (hit count: 0)
seq 10 permit 0.0.0.0/0 le 32 (hit count: 0)
ip prefix-list filter_ospf:
count: 4, range entries: 1, sequences: 5 - 10
seq 5 deny 100.100.1.0/24 (hit count: 5)
seq 6 deny 200.200.1.0/24 (hit count: 1)
seq 7 deny 200.200.2.0/24 (hit count: 1)
seq 10 permit 0.0.0.0/0 le 32 (hit count: 132)
FTOS#
show ip prefix-list summary
s z
Display a summary of the configured prefix lists.
Syntax
show ip prefix-list summary [prefix-name]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
S6000
prefix-name
(OPTIONAL) Enter a text string as the name of the prefix list, up to 140 characters.
Version 9.0.2.0 Introduced on the S6000
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
Version 7.6.1.0 Support added for S-Series
S6000
prefix-name
(OPTIONAL) Enter a text string as the name of the prefix list, up to 140 characters long.
Version 9.0.2.0 Introduced on the S6000
Version 8.3.11.1 Introduced on the Z9000.