Reference Guide

Access Control Lists (ACL) | 141
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 6-6. Command Example: show mac accounting access-list
FTOS#show mac accounting access-list mac-ext interface po 1
Extended mac access-list mac-ext on GigabitEthernet 0/11
seq 5 permit host 00:00:00:00:00:11 host 00:00:00:00:00:19 count
(393794576 packets)
seq 10 deny host 00:00:00:00:00:21 host 00:00:00:00:00:29 count (89076777
packets)
seq 15 deny host 00:00:00:00:00:31 host 00:00:00:00:00:39 count (0
packets)
seq 20 deny host 00:00:00:00:00:41 host 00:00:00:00:00:49 count (0
packets)
seq 25 permit any any count (0 packets)
Extended mac access-list mac-ext on GigabitEthernet 0/12
seq 5 permit host 00:00:00:00:00:11 host 00:00:00:00:00:19 count (57589834
packets)
seq 10 deny host 00:00:00:00:00:21 host 00:00:00:00:00:29 count (393143077
packets)
seq 15 deny host 00:00:00:00:00:31 host 00:00:00:00:00:39 count (0
packets)
seq 20 deny host 00:00:00:00:00:41 host 00:00:00:00:00:49 count (0
packets)
seq 25 permit any any count (0 packets)
FTOS#
Related
Commands
access-list-name
Enter the name of a configured MAC ACL, up to 140 characters.
interface interface Enter the keyword interface followed by the one of the following keywords
and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel followed
by a number:
S-Series Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
in | out
Identify whether ACL is applied Ingress (in) or egress (out) side.
Version 9.0.2.0 Introduced on the S6000
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
Version 9.0.2.0 Support added for S-Series
show mac learning-limit Display destination counters for Layer 2 traffic (available on
physical interfaces only).