Reference Guide

136 | Access Control Lists (ACL)
www.dell.com | support.dell.com
1 0000000000000000 1111110000000000 0 1023 1024
Total Ports: 1024
Related
Commands
resequence access-list
s z
Re-assign sequence numbers to entries of an existing access-list.
Syntax
resequence access-list {ipv4 | mac} {access-list-name StartingSeqNum Step-to-Increment}
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
When all sequence numbers have been exhausted, this feature permits re-assigning new sequence
number to entries of an existing access-list.
Prior to 7.8.1.0, names are up to 16 characters long.
Related
Commands
ip access-list extended Configure an extended ACL.
permit Assign a permit filter for IP packets.
permit tcp Assign a permit filter for TCP packets.
S6000
ipv4 | mac Enter the keyword ipv4, or mac to identify the access list type to resequence.
access-list-name
Enter the name of a configured IP access list, up to 140 characters.
StartingSeqNum
Enter the starting sequence number to resequence.
Range: 0 - 4294967290
Step-to-Increment
Enter the step to increment the sequence number.
Range: 1 - 4294967290
Version 9.0.2.0 Introduced on the S6000
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names
are up to 16 characters long.
Version 7.6.1.0 Added support for S-Series
resequence prefix-list ipv4 Resequence a prefix list