Reference Guide

120 | Access Control Lists (ACL)
www.dell.com | support.dell.com
Command Modes
CONFIGURATION-STANDARD-ACCESS-LIST
Command
History
Usage
Information
The order option is relevant in the context of the Policy QoS feature only. See the “Quality of
Service” chapter of the FTOS Configuration Guide for more information.
The S-Series cannot count both packets and bytes, so when you enter the count byte options, only
bytes are incremented.
Related
Commands
resequence access-list
s z
Re-assign sequence numbers to entries of an existing access-list.
Syntax
resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum
Step-to-Increment}
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.1.0 Add DSCP value for ACL matching.
Version 8.2.1.0 Allows ACL control of fragmented packets for IP (Layer 3) ACLs.
Version 7.6.1.0 Added support for S-Series
Version 6.5.10
Expanded to include the optional QoS
order priority for the ACL entry.
Note: When ACL logging and byte counters are configured simultaneously, byte counters
may display an incorrect value. Configure packet counters with logging instead.
deny Assign a IP ACL filter to deny IP packets.
ip access-list standard Create a standard ACL.
S6000
ipv4 | ipv6 | mac Enter the keyword ipv4, or mac to identify the access list type to
resequence.
access-list-name
Enter the name of a configured IP access list.
StartingSeqNum
Enter the starting sequence number to resequence.
Range: 0 - 4294967290
Step-to-Increment
Enter the step to increment the sequence number.
Range: 1 - 4294967290
Version 9.0.2.0 Introduced on S6000
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names
are up to 16 characters long.