Reference Guide

116 | Access Control Lists (ACL)
www.dell.com | support.dell.com
Command
History
show ip accounting access-list
s z
Display the IP access-lists created on the switch and the sequence of filters.
Syntax
show ip accounting {access-list access-list-name | cam_count} interface interface
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 6-3. Command Example: show ip accounting access-lists
FTOS#show ip accounting access FILTER1 interface gig 1/6
Extended IP access list FILTER1
seq 5 deny ip any 191.1.0.0 /16 count (0x00 packets)
seq 10 deny ip any 191.2.0.0 /16 order 4
seq 15 deny ip any 191.3.0.0 /16
seq 20 deny ip any 191.4.0.0 /16
seq 25 deny ip any 191.5.0.0 /16
Table 6-1 defines the information in Figure 6-3.
Version 9.0.2.0 Introduced on S6000
Version 8.3.11.1 Introduced on the Z9000.
S6000
access-list-name
Enter the name of the ACL to be displayed.
cam_count
List the count of the CAM rules for this ACL.
interface interface Enter the keyword interface followed by the interface type and slot/port or
number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel followed
by a number:
S-Series Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed
by the slot/port information.
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on S-Series.
pre-Version 6.2.1.1 Introduced
Table 6-1. show ip accounting access-lists Command Example Field
Field Description
“Extended IP...” Displays the name of the IP ACL.