Reference Guide

114 | Access Control Lists (ACL)
www.dell.com | support.dell.com
The following commands allow you to clear, display, and assign IP ACL configurations.
• access-class
• clear counters ip access-group
• ip access-group
• ip control-plane egress-filter
• show ip accounting access-list
access-class
s z
Apply a standard ACL to a terminal line.
Syntax
access-class access-list-name
To remove an ACL, use the no access-class access-list-name command.
Parameters
Defaults
Not configured.
Command Modes
LINE
Command
History
clear counters ip access-group
s z
Erase all counters maintained for access lists.
Syntax
clear counters ip access-group [access-list-name]
Parameters
Command Modes
EXEC Privilege
Command
History
Note: See also Commands Common to all ACL Types.
S6000
access-list-name
Enter the name of a configured Standard ACL, up to 140 characters.
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on S-Series.
pre-Version 6.2.1.1 Introduced
S6000
access-list-name
(OPTIONAL) Enter the name of a configured access-list, up to 140 characters.
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on S-Series.
pre-Version 6.2.1.1 Introduced