Reference Guide

106 | 802.1X
www.dell.com | support.dell.com
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command
History
dot1x tx-period
s
Configure the intervals at which EAPOL PDUs are transmitted by the Authenticator
PAE.
Syntax
dot1x tx-period seconds
To return to the default, use the
no dot1x tx-period command.
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command
History
show dot1x cos-mapping interface
s
Display the CoS priority-mapping table provided by the RADIUS server and applied
to authenticated supplicants on an 802.1X-enabled port.
Syntax
show dot1x cos-mapping interface interface [mac-address mac-address]
seconds Enter a time-out value in seconds.
Range: 1 to 300, where 300 is implementation dependant.
Default: 30
Version 9.0.2.0 Introduced on S6000
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.0 Introduced on S-Series
S6000
seconds Enter the interval time, in seconds, that EAPOL PDUs are transmitted.
Range: 1 to 65535
Default: 30
Version 9.0.2.0 Introduced on S6000
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.0 Introduced on S-Series
S6000