Reference Guide

102 | 802.1X
www.dell.com | support.dell.com
dot1x max-eap-req
s
Configure the maximum number of times an EAP (Extensive Authentication
Protocol) request is transmitted before the session times out.
Syntax
dot1x max-eap-req number
To return to the default, use the no dot1x max-eap-req command.
Parameters
Defaults
2
Command Modes
INTERFACE
Command
History
dot1x max-supplicants
s
Restrict the number of supplicants that can be authenticated and permitted to access
the network through the port. This configuration is only takes effect in multi-auth
mode.
Syntax
dot1x max-supplicants number
Parameters
Defaults
128 hosts can be authenticated on a single authenticator port.
Command Modes
INTERFACE
Command
History
Related
Commands
S6000
number Enter the number of times an EAP request is transmitted before a session
time-out.
Range: 1 to 10
Default: 2
Version 9.0.2.0 Introduced on S6000
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.0 Introduced on S-Series
S6000
number Enter the number of supplicants that can be authenticated on a single port
in multi-auth mode.
Range: 1-128
Default: 128
Version 9.0.2.0 Introduced on S6000
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.0 Introduced on S-Series
dot1x host-mode Enable single-host or multi-host authentication