Manualshelf

Concept Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000
411412413414415416417418419420
Exclude a Smaller Port Range
The following is an example show how the smaller of two port ranges is omitted in the interface-range prompt.
Example of the Interface-Range Prompt for Multiple Port Ranges
DellEMC(conf)#interface range tengigabitethernet 2/1 - 23 , tengigab 2/1 - 10
DellEMC(conf-if-range-te-2/1-23)#
Overlap Port Ranges
The following is an example showing how the interface-range prompt extends a port range from the smallest start port number to the
largest end port number when port ranges overlap. handles overlapping port ranges.
Example of the Interface-Range Prompt for Overlapping Port Ranges
DellEMC(conf)#interface range tengigabitethernet 2/1 - 11 , te 2/1 - 23
DellEMC(conf-if-range-te-2/1-23)#
Commas
The following is an example of how to use commas to add dierent interface types to a range of interfaces.
Example of Adding Interface Ranges
DellEMC(config-if)# interface range tengigabitethernet 5/1 - 23, tengigabitethernet 1/1 - 2
DellEMC(config-if-range-te-5/1-23,te1/1-2)# no shutdown
DellEMC(config-if-range-te-5/1-23,te1/1-2)#
Add Ranges
The following example shows how to use commas to add VLAN and port-channel interfaces to the range.
Example of Adding VLAN and Port-Channel Interface Ranges
DellEMC(config-if-range-te-1/1-2)# interface range Vlan 2 – 100 , Port 1 – 25
DellEMC(config-if-range-te-1/1-2-vl-2-100-po-1-25)# no shutdown
Dening Interface Range Macros
You can dene an interface-range macro to automatically select a range of interfaces for conguration.
Before you can use the macro keyword in the interface-range macro command string, dene the macro.
To dene an interface-range macro, use the following command.
• Denes the interface-range macro and saves it in the running conguration le.
CONFIGURATION mode
Dene the Interface Range
The following example shows how to dene an interface-range macro named “test” to select Ten Gigabit Ethernet interfaces 5/1 through
5/4.
Example of the define interface-range Command for Macros
DellEMC(config)# define interface-range test tengigabitethernet 5/1 - 4
Interfaces
417