Administrator Guide

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
7.5.1.0 Added support for IPv6 ISIS.
6.3.1.0 Introduced.
Usage Information
To redistribute a default route (0.0.0.0/0), configure the default-information originate command.
Changing or disabling a keyword in this command does not affect the state of the other command keywords.
When an LSP with an internal metric is received, the Dell EMC Networking OS considers the route cost while
considering the advertised cost to reach the destination.
Redistributed routing information is filtered with the distribute-list out command to ensure that the
routes are properly passed to the receiving routing protocol.
How a metric value assigned to a redistributed route is advertised depends on how on the configuration of the
metric-style command. If the metric-style command is set for Narrow or Transition mode and the
metric value in the redistribute command is set to a number higher than 63, the metric value advertised in
LSPs is 63. If the metric-style command is set for Wide mode, the metric value in the redistribute
command is advertised.
Related
Commands
• default-information originate — generate a default route for the IS-IS domain.
• distribute-list out — suppress networks from being advertised in updates. This command filters redistributed
routing information.
redistribute bgp
Redistribute routing information from a BGP process.
Syntax
redistribute bgp AS number [level-1| level-1-2 | level-2] [metric metric-value]
[metric-type {external| internal}] [route-map map-name]
To return to the default values, use the no redistribute bgp command with the appropriate parameters.
Parameters
AS number Enter a number that corresponds to the autonomous system number. The range is from 1
to 65355.
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS Level 1 routes only.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS Level 1 and Level 2 routes.
842 Intermediate System to Intermediate System (IS-IS)