Administrator Guide

Example
DellEMC# show hardware vlan-counters 1
Counters for vlanid: 1
------------------------
Total number of inpackets: 0
Total number of inbytes: 0
Total number of outpackets: 0
Total number of outbytes: 0
DellEMC#
Related
Commands
• clear hardware system-flow — clear the statistics from selected hardware components.
show hardware buffer-stats-snapshot
Displays buffer statistics tracking resource information for a specific interface.
Syntax
show hardware buffer-stats-snapshot resource {headroom-pool [detail] | service-
pool [detail] interface interface {{priority-group {id | all} | queue ucast {id
| all} mcast {id | all} | all} [detail]}
Parameters
headroom-pool
detail
Enter the keyword headroom-pool followed by the keyword detail to view detailed
information about the headroom pool usage.
service-pool detail Enter the keyword service-pool followed by the keyword detail to view detailed
information about the service pool usage.
interface interface
Enter any of the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
queue
Enter the keyword queue followed by all for displaying details of all queues, ucast
queue-id or all for displaying Unicast queue details, and mcast queue-id or all for
displaying Multicast queue details.
priority-group Enter the keyword priority-group followed by id for specific priority-group or
keyword all.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500.
526 Debugging and Diagnostics