Administrator Guide

show default-gateway
Display the IP address configured for the default gateway.
S6000
Syntax show default-gateway
Command Modes BOOT_USER
Command History
Version Description
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Example
BOOT_USER # show default-gateway
Gateway IP address: 10.16.100.254
BOOT_USER #
Related
Commands
default-gateway— Configure the IP address for the default gateway.
interface_management_ethernet_ip_address — Assign an IP address to the Management Ethernet interface.
show interface management ethernet
Display the IP address configured for the Management interface.
S6000
Syntax
show interface management ethernet
Command Modes BOOT_USER
Command History
Version Description
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Example
BOOT_USER # show interfaces management ethernet
Management ethernet IP address: 10.16.133.17/24
BOOT_ADMIN #
On the S6000, the output of this command includes the MAC address and port number of the assigned
management port.
Example
BOOT_ADMIN # show int man eth
Management ethernet IP address: 10.16.132.4/16
BOOT_ADMIN #
Related
Commands
interface_management_ethernet_ip_address — Assign an IP address to the Management Ethernet interface.
reload — Configure speed, duplex, and negotiation settings for the management interface.
334 Boot Command Line Interface