Administrator Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
ip ssh connection-rate-interval
Configure the rate interval in which the maximum number of SSH connections can be attempted.
Syntax
ip ssh connection-rate-interval 1-5
Parameters
1-5 Enter the rate interval in which the maximum number of SSH connections can be
attempted. The range is from 1 to 5 minutes.
Defaults 1 minute
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Introduced on the S6000–ON, S6100–ON and Z9100–ON.
ip ssh connection-rate-lockout
Configure a lockout period until which the SSH connections are blocked, after the SSH connection attempts reach the rate limit.
Syntax
ip ssh connection-rate-lockout 0—300
Parameters
0-300 Enter a lockout period in seconds. The range is from 0 to 300 seconds.
Defaults 0
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Introduced on the S6000–ON, S6100–ON and Z9100–ON.
ip ssh hostbased-authentication
Enable hostbased-authentication for the SSHv2 server.
Syntax
ip ssh hostbased-authentication enable
To disable hostbased-authentication for SSHv2 server, use the no ip ssh hostbased-authentication
enable command.
Parameters
enable Enter the keyword enable to enable hostbased-authentication for SSHv2 server.
Security 1355