Administrator Guide
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.1 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Example of show
qos statistics
egress—queue
with per queue per
port tx and drop
rates
DellEMC#show qos statistics egress-queue tengigabitethernet 1/1
Interface Te 1/1
Unicast/Multicast Egress Queue Statistics
Queue# Q# Type TxPkts TxPkts/s TxBytes TxBytes/s DroppedPkts DroppedPkts/s DroppedBytes DroppedBytes/s
--------------------------------------------------------------------------------------------------------------------
0 UCAST 0 0 0 0 0 0 0 0
1 UCAST 0 0 0 0 0 0 0 0
2 UCAST 0 0 0 0 0 0 0 0
3 UCAST 1708252734 2340972 874625399808 1198000301 1357413570 0 694995747840 0
4 UCAST 0 0 0 0 0 0 0 0
5 UCAST 0 0 0 0 0 0 0 0
6 UCAST 0 0 0 0 0 0 0 0
7 UCAST 0 0 0 0 0 0 0 0
8 UCAST 0 0 0 0 0 0 0 0
9 UCAST 1132 1 143063 217 0 0 0 0
10 MCAST 0 0 0 0 0 0 0 0
11 MCAST 0 0 0 0 0 0 0 0
12 MCAST 0 0 0 0 0 0 0 0
13 MCAST 0 0 0 0 0 0 0 0
14 MCAST 0 0 0 0 0 0 0 0
15 MCAST 0 0 0 0 0 0 0 0
16 MCAST 0 0 0 0 0 0 0 0
17 MCAST 0 0 0 0 0 0 0 0
18 MCAST 0 0 0 0 0 0 0 0
19 MCAST 0 0 0 0 0 0 0 0
DellEMC#
Example of show
qos statistics
wred-profile
DellEMC(conf)#do show qos statistics wred-profile
Global Wred State : Enabled
Interface Te 1/11
Drop-statistic Dropped Pkts
Green 0
Yellow 6730113
Out of Profile 0
Usage Information
In a dual homing setup, you can use this command only from the primary VLT peer.
The following list describes output of the show qos statistics command in the example:
• Queue # — Queue Number.
• Queued Bytes — Snapshot of the byte count in that queue.
• Queued Pkts — Cumulative packet count in that queue.
• Matched Pkts — The number of packets that matched the class-map criteria.
NOTE: When you configure trust , matched packet counters are not incremented in this field.
• Matched Bytes — The number of bytes that matched the class-map criteria.
NOTE: When you configure trust , matched byte counters are not incremented in this field.
• Dropped Pkts — The total of the number of packets dropped for green, yellow and out-of-profile.
show qos wred-profile
View the WRED profile details.
Syntax
show qos wred-profile wred-profile-name
1214 Quality of Service (QoS)