Administrator Guide

Rate-limit 50 50 peak 50 50
Wred yellow 1
Wred green 1
DellEMC#
show qos statistics
View QoS statistics.
Syntax
show qos statistics {egress—queue [interface]} | {wred-profile [interface]} |
[interface]
Parameters
egress-queue
interface
Enter the keyword egress-queue to display the egress-queue statistics and optionally one
of the following keywords and slot/port or number information.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the
slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port
information.
wred-profile
interface
Enter the keywords wred-profile and optionally one of the following keywords and slot/
port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the
slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port
information.
interface Enter one of the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the
slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port
information.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking
OS Command Line Reference Guide.
Version Description
9.12(0.0) Modified to display the global WRED state.
9.11(0.0) Updated the show qos statistics egress—queue output to reflect per queue per
port tx and drop rates.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Added the egress-queue keyword.
9.7(0.0) Introduced on the S6000-ON.
Quality of Service (QoS) 1213