Users Guide

The S6000 Switch | 11
• Temperature monitoring
• Software-readable thermal monitor
• Real time clock (RTC) support
• Hot-plugging redundant power supply
• Current monitoring for power management
• Removable fan that you can manage
• Standard 1U switch high
Physical Dimensions
The S6000 has the following physical dimensions:
• 434 x 460 x 43.5 mm (W x D x H)
• 17.09 x 18.11 x 1.71 inches (W x D x H)
Switch Ports
The following is a list of the standard ports located on each S6000 switch:
• Serial RS-232 port (RJ-45 type)
• Out of band (OOB) Ethernet management port (RJ-45 type)
• Thirty-two 40Gbps QSFP+ ports
• One universal serial bus port (USB Type-A)
Determine Switch Status
You can view S6000 status information in several ways, including LEDs and boot menu options. Also,
you can view status information through the CLI show commands and with simple network management
protocol (SNMP) traps. For more information about these options, refer to the Dell Networking OS
Command Line Reference Guide for the S6000 Switch and the Dell Networking OS Configuration Guide
for the S6000 Switch.
LED Displays
As shown in Figure 2-3 , the S6000 includes LED displays on both the I/O and PSU side of the switch.
Table 2-1 through Table 2-3 list the LED definitions for the S6000 switch. This includes the system, PSU,
and fan status.