Reference Guide

Field Description
Accounted Packet Buffer Shared buffer space that is in use by
the packets
Example
FTOS# show hardware stack-unit 0 buffer unit 0 port 1 priority-
group 0 buffer-info
----- Buffer Accounting Stats for Unit 0 Port 1 priority-
group 0 -----
Maximum Shared Limit: 0
Default Packet Buffer allocate for the priority-group: 61440
Accounted Packet Buffer: 0
show hardware system-flow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
S6000
Syntax
show hardware system-flow layer2 stack-unit id port-set number
[counters]
Parameters
acl | qos For the selected stack member and stack member port-pipe,
display which system flow entry the packet hits and what
queue the packet takes as it dumps the raw system flow
tables.
stack-unit id Enter the keywords stack-unit to select a stack member
ID. The range is 0 to 5 for the S6000.
port-set
number
[counters]
Enter the keywords port-set with a port-pipe number.
The range is 0 to 0 for the S6000.
(OPTIONAL) Enter the keyword counters to display hit
counters for the selected ACL or QoS option.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Debugging and Diagnostics
519