Users Guide

EXEC Privilege
Command History
Version Description
9.11(0.0) Introduced on the S6000, S6000–ON, S6100–ON and Z9100–ON.
Usage Information Use this command to view the buer details of lossy and lossless trac in the service pool.
Example
Dell#show hardware buffer service-pool buffer-info
------Buffer Details for Stack-Unit 1 portpipe 0 ------
-----------------------------------------------------------------
Service-Pool Configured Buffer(KB) Used Buffer(KB)
-----------------------------------------------------------------
SP0(Lossy) 9758 7760
SP1(Lossless) 3842 697
Dell#
show hardware drops
Displays internal drops on the specied interface or for a range of interface.
Syntax
show hardware drops interface interface
Parameters
drops
Enter the keyword drops to display internal drops.
interface
Enter any of the following keywords and the interface or interface range information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(0.0)
Included the FEC BER details in the output for 100G interfaces of S6100–ON and Z9100–
ON .
Included FCS Error Ratio in the output for all interfaces of S6000, S6000–ON, S6100–
ON, and Z9100–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
534 Debugging and Diagnostics