Users Guide

Parameters
stack-unit stack-
unit-number
{command-option}
Enter the keywords stack-unit to select a particular stack member and then enter
one of the following command options to display a collection of data based on the option
entered. The range is from 0 to 5.
buer Enter the keyword buffer. To display the total buer statistics for the stack unit, enter
the keyword total-buffer. To display buer statistics for a all interface, enter the
keyword
interface followed by the keyword all.
To display total buer information for the port, enter the keywords buffer-info. To
display a queue range, enter 0 to 14 for a specc queue or all.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics then the keywords stack
port and its number, from 0 to 63 to display the data plane statistics, which shows the
High Gig (
Higig) port raw input/output counter statistics to which the stacking module
is connected.
cpu management
statistics
Enter the keywords cpu management statistics to display the counters of the
management port.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics, to display the Management plane
input/output counter statistics of the pseudo party bus interface.
cpu sata-interface
statistics
Enter the keywords cpu sata-interface statistics to display the sata
interface error counter statistics.
drops [unit unit-
number]
Enter the keyword drops to display internal drops on the selected stack member. Enter
the optional keyword unit unit-number to display the internal drop counters of the
specied port pipe.
fpga register Enter the keyword to display the register value of the fpga register.
unit unit-number
{counters | details |
port-stats [detail] |
register}
Enter the keyword unit then a number and then enter one of the keywords to
troubleshoot errors on the selected port-pipe and to give status on why a port is not
coming up to register level.
TI monitor Enter the unit keyword to show information regarding the TI register.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Replaced the keyword port with interface.
9.7(0.0) Introduced on the S6000-ON.
526 Debugging and Diagnostics