Users Guide
Dell#
Related Commands
• show ip bgp — view the current BGP routing table.
show ip bgp next-hop
View all next hops (using learned routes only) with current reachability and ap status. This command only displays one path, even if the
next hop is reachable by multiple paths.
S6000
Syntax
show ip bgp [vrf vrf-name] next-hop
Parameters
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to view all next hops
corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
The following describes the show ip bgp next-hop command shown in the following example.
Field Description
Next-hop Displays the next-hop IP address.
Via Displays the IP address and interface used to reach the next hop.
440 Border Gateway Protocol