Users Guide

Version Description
7.7.1.0 Introduced on the C-Series.
Usage Information
If you congure the set next-hop command in ROUTE-MAP mode, the conguration takes precedence over
the neighbor next-hop-self command.
If you do not use the all keyword, the next hop of only eBGP-learned routes is updated by the route reector. If
you use the all keyword, the next hop of both eBGP- and iBGP-learned routes are updated by the route reector.
neighbor password
Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors.
Syntax
neighbor {ip-address | peer-group-name} password [encryption-type] password
To delete a password, use the no neighbor {ip-address | peer-group-name} password command.
Parameters
ip-address Enter the IP address of the router to be included in the peer group.
peer-group-name Enter the name of a congured peer group.
encryption-type (OPTIONAL) Enter 7 as the encryption type for the password entered. 7 means that the
password is encrypted and hidden.
password
Enter a text string up to 80 characters long. The rst character of the password must be
a letter.
You cannot use spaces in the password.
Defaults Not congured.
Command Modes ROUTER BGP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
394 Border Gateway Protocol