Users Guide

udf-qualier-value
Create a UDF qualier value to assign values for all UDF IDs.
Syntax
udf-qualifier-value name
To return to the default settings, use the no udf-qualifier-value name command.
Parameters
name Enter the UDF qualier value prole name, up to 64 characters.
Defaults None
Command Modes CONFIGURATION-UDF TCAM
Example
Dell(conf-udf-tcam)# udf-qualifier-value ipnip_val1
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S6000, Z9500.
Related Commands
udf-id — assigns value for each congured UDF ID in the given UDF TCAM prole.
udf-tcam — creates a context for UDF TCAM.
show cong — displays the current UDF-Qualier-Value Prole conguration.
udf-tcam
Create a context for UDF TCAM.
Syntax
udf-tcam name seq number
To return to the default settings, use the no udf-tcam name seq number command.
Parameters
name Enter the UDF ACL prole name, up to 64 characters.
number Enter the keyword seq then the sequence number of the Udf-Tcam table. The range is
from 1 to 512.
Defaults None
Command Modes CONFIGURATION
Example
Dell(conf)#udf-tcam ipnip seq 1
276 Access Control Lists (ACL)